Layout Adjustment
147
Copy
3
îš„ Auto Center
Shifts document images so that they are placed in the center of paper.
Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
îš„ Corner Shift
Shifts document images so that they are placed at an edge or corner of paper. You can
select from 8 shift directions.
Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
îš„ Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in the
range from 0 to 50 mm in 1 mm increments.
Invert Image (Making Reversed Copies of Images)
This feature allows you to reverse the left and right sides of the document image or to
create a negative image of the document when making copies.
z
When [Output Color] is set to [Black & White] or [Single Color], the black color on the document is inverted to
white, and the white color to black.
z
When [Output Color] is set to [Color], the colors are inverted to their complementary colors.
z
When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns to white.
1 Select [Invert Image].
2 Select any option.
îš„ Mirror Image
Reverses the left and right sides of the document image.
To Next Page
Loading...
Need help?
General
