Fax
226
Fax
4
Simple Fax
You can select [Fax/Internet Fax] or [Simple Fax] on the Services Home screen to set the
features for the Fax service.
This section describes the features you can select on the [Simple Fax] screen. [Simple Fax]
allows you to use only basic features to easily send faxes. The following shows the reference
section for each feature.
"Specifying a Destination Using the Numeric Keypad" (P.226)
"Speed Dialing (Specifying a Destination Using an Address Number)" (P.227)
"Specifying a Destination Using a One Touch Button" (P.228)
"Previewing the Read Images during a Simple Fax Job" (P.229)
"Resolution (Specifying the Scanning Resolution)" (P.230)
"Original Type (Selecting the Document Type)" (P.231)
"2 Sided Scanning (Transmitting 2-sided Originals)" (P.231)
1 Select [Simple Fax] on the Services Home screen.
z
[Simple Fax] is not displayed on the Services Home screen when the Server Fax service is enabled.
2 Select a feature on the [Simple Fax] screen.
z
For the Simple Fax service, you can only set [Resolution], [Original Type], and [2 Sided Scanning]. In addition,
when you use this service, [Mixed Size Originals] is set to [On], and [Transmission Header Text] is set to
[Display Header]. If you want to set the other options, use [Fax/Internet Fax] on the Services Home screen to
send faxes.
z
You cannot switch between [Fax/Internet Fax] and [Simple Fax]. To switch one to another, you must return to
the Services Home screen. Once you return to the Services Home screen, the settings you have made in [Fax/
Internet Fax] or [Simple Fax] will be cleared.
Specifying a Destination Using the Numeric Keypad
Specify a destination using the numeric keypad.
To Next Page
Loading...
Need help?
General
