Copy
111
Copy
3
îš„ Variable %
Specify a ratio in the range from 25 to 400% in 1% increments. To specify a value, use the
numeric keypad or [+] and [-]. Specifying "100 %" allows you to make copies at the same
image size as the original document.
When you make enlarged/reduced copies from standard sized documents on standard
sized paper, the following copy ratios will be applied.
* : Load a document in landscape orientation ( ) to match the paper orientation loaded in the tray.
z
How to load a document depends on the size and orientation of a document. For more information, refer to "Step 1 Loading
Documents" (P.90).
z
For information on paper that can be loaded, refer to "Paper and Other Media" > "Paper Types" in the
Administrator Guide.
îš„ Preset %
Select a copy ratio from the following options.
îš‹ 100%
Copies at the same image size as the original document.
îš‹ Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
z
This cannot be selected together with [Auto Select] under [Paper Supply].
îš‹ Preset ratios
Select from the preset ratios.
z
You can change the copy ratio associated with each button. For information on the settings, refer to "Tools" > "Copy Service
Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
îš„ Slight Reduction (Improves Fit)
Select this check box to slightly reduce the specified copy ratio to copy the complete image
onto the paper.
z
If you select [Slight Reduction (Improves Fit)] and you do not want to erase the edges of the document, set
the amount of edge erase to 0 mm. Note that if the amount is set to 0 mm, the edges of the copied
Copy
/
Original
A6 B6 A5 B5 A4 B4 A3
A6 100% 122% 141% 173% 200%
245%
*
282%
*
B6 81% 100% 115% 141% 163%
200%
*
230%
*
A5 70% 86% 100% 122% 141%
173%
*
200%
*
B5 57% 70% 81% 100% 115%
141%
*
163%
*
A4 50% 61% 70% 86% 100% 122% 141%
B4 40% 50% 57% 70% 81% 100% 115%
A3 35% 43% 50% 61% 70% 86% 100%