z
The Finisher-B1 is optional. In this guide, the Finisher-A1 and Finisher-B1 are referred to as the "finisher".
z
The power cord connected to the Finisher-B1 is a connecting cord dedicated to the machine. Do not connect
this cord to any other devices than the machine.
13 US 2/3 Hole Punch Kit
(US standard)
(optional)
2/4 Hole Punch Kit
(optional)
Hole-punches outputs.
z
The distance between the two holes made with the US 2/3
Hole Punch Kit (US standard) is 70 mm, which is different
from the 80 mm distance made with the 2/4 Hole Punch Kit.
14 Center tray (Top cover
of the finisher
transport)
Copies and prints are delivered here when they are unable
to be delivered to the output tray or the finisher tray. Pull
the cover upward when clearing paper jams.
To Next Page
Loading...
Need help?
General
