Using the Operator Panel Menus and Keypad 285
•Symbol Set
Purpose:
To specify a symbol set for a specified font.
Values:
• Font Size
Purpose:
To specify the font size for scalable typographic fonts, within the range of 4.00 to 50.00. The default is 12.00.
Font size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
NOTE:
• The Font Size menu is only displayed for typographic fonts.
• Font Pitch
Purpose:
To specify the font pitch for scalable mono spaced fonts, within the range of 6.00 to 24.00. The default is 10.00.
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For nonscheduled mono
spaced fonts, the pitch is displayed, but cannot be changed.
NOTE:
• The Font Pitch menu is only displayed for fixed or mono spaced fonts.
• Form Line
Purpose:
To set the number of lines in a page.
Values:
*1
Denotes region-specific factory default values.
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and
Orientation menu items. Select the correct Form Line and Orientation before changing Form Line.
See also:
• "Orientation" on page 284
ROMAN-8
*
WIN L1 ISO-6
ISO L1 WIN L2 ISO-11
ISO L2 WIN L5 ISO-15
ISO L5 DESKTOP ISO-17
ISO L6 PS TEXT ISO-21
PC-8 MC TEXT ISO-60
PC-8 DN MS PUB ISO-69
PC-775 MATH-8 WIN 3.0
PC-850 PS MATH WINBALT
PC-852 PI FONT SYMBOL
PC-1004 LEGAL WINGDINGS
PC-8 TK ISO-4 DNGBTSMS
64
*1
(mm series)/60
*1
(inch series) Sets the value in increments of 1.
5–128
To Next Page
Loading...
Need help?
General
