Fuji Xerox DocuPrint CM405 df User Manual

Using the Operator Panel Menus and Keypad 301
2 Sided Print
To set the duplex printing for fax.
Values:
Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Values:
Discard Size
Purpose:
To set the printer to discard images or any text at the bottom of a fax page when the entire page does not fit the
output paper.
Values:
• Transmission Defaults
Purpose:
To configure settings for transmitting fax.
Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Values:
Off
*
Does not perform duplex printing.
On Performs duplex printing.
Off
*
Does not receive a fax by pressing a remote receive code on the
external telephone.
On Receives a fax by pressing a remote receive code on the external
telephone.
Remote Receive Tone Specifies the tone in two digits to start Remote Receive.
Off
*
Prints excess images or text at the bottom of a fax page without discarding it.
On Discards any excess images or text.
Auto Reduction Automatically reduces a fax page to fit it onto the appropriate paper size.
Number of Redial 3
*
Sets the number of redial attempts to make when the destination
fax number is busy. If you enter 0, the printer will not redial. The
value is set in increments of 1.
0-9
Redial Interval 1
*
Sets the interval between redial attempts. The value is set in
increments of 1 minute.
1-15
Interval Timer 8
*
Sets the interval between re-send attempts. The value is set in
increments of 1 second.
3-255

Fuji Xerox DocuPrint CM405 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM405 df
Category	All in One Printer
Language	English