318 Using the Operator Panel Menus and Keypad
*1
This item is available only when Password Locked or Color Password Locked is enabled.
• Edit Email From Field
Purpose:
To specify whether to enable editing of the transmission source when you use Scan to E-mail.
Values:
• Confirm Recipients
NOTE:
• If Confirm Recipients menu is set to Confirm Recipient, recipients can only be selected from the phone book or
the address book. You cannot directly enter an address or fax number.
Purpose:
To specify whether to confirm the recipient before sending a fax or scan.
Values:
• Domain Filtering
NOTE:
• Set the domains from SMTP Domain Filtering on the CentreWare Internet Services.
Purpose:
To specify whether to only send e-mails to specified domains.
Values:
• Software Download
Purpose:
To enable or disable download of firmware updates.
Values:
USB Services Show USB
Pop Up
Menu
Enable
*
Shows a USB Drive Detected screen when a USB storage
device is inserted in to the printer.
Disable Does not show a USB Drive Detected screen when a USB
storage device is inserted in to the printer.
Display USB
Memory
Services
Hide until USB
inserted
*
Hides menus concerning USB storage device until a USB
storage device is inserted to the printer.
Always Display Menus concerning USB storage device are shown without a
USB storage device inserted to the printer.
Change Passcode
*1
Changes the passcode that is set under the Service Lock
menu.
Disable Disables editing of the transmission source.
Enable
*
Enables editing of the transmission source.
No Confirmation
*
Does not display a screen to reconfirm the recipient before the job is actually sent.
Confirm Recipient Displays a screen to reconfirm the recipient before the job is actually sent.
Disable
*
Disables Domain Filtering.
Enable Only allows e-mails to be sent to specified domains.
Disable Disables firmware updates.
Enable
*
Enables firmware updates.
To Next Page
Loading...
Need help?
General
