310 Using the Operator Panel Menus and Keypad
Banner Sheet
NOTE:
• Banner Sheet feature is available only when the optional 550 sheet feeder is installed on the printer.
Purpose:
To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded.
Values:
Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match
the paper size settings for the current job.
Values:
Letterhead 2 Sided
Purpose:
To specify whether to print on both sides when using letterhead.
Values:
Insert Position Off
*
Does not print the banner sheet.
Front Inserted before the first page of every copy.
Back Inserted after the last page of every copy.
Front & Back Inserted before the first page of every copy and after the last
page of every copy.
Specify Tray Bypass Tray The banner sheet is loaded in the bypass tray.
Tray1
*
The banner sheet is loaded in the standard 550 sheet tray.
Tray2 The banner sheet is loaded in the optional 550 sheet feeder.
Off
*
No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger paper size, the
printer substitutes paper of nearest size.
Nearest Size Substitutes paper of nearest size.
Use Bypass Tray Substitutes paper from the bypass tray.
Disable
*
Does not print on both sides of letterhead.
Enable Prints on both sides of letterhead.
To Next Page
Loading...
Need help?
General
