290 Using the Operator Panel Menus and Keypad
Network Setup
Use the Network Setup menu to change the printer settings affecting jobs sent to the printer through the wired or
wireless network.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Ethernet/Wireless
NOTE:
• When using a wired network, Ethernet is displayed. When the optional wireless printer adapter is attached and the
Ethernet cable is disconnected, Wireless is displayed.
Purpose:
To confirm or specify network settings.
Wireless Status
NOTE:
• Wireless Status feature is available only when the printer is connected using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
*The settings can be configured only on CWIS.
Status Good
Acceptable
Low
No Reception
SSID Displays the name that identifies the wireless network.
Encryption Type No Security
WEP
WPA-PSK-TKIP
WPA2-PSK-AES
Mixed mode PSK
WPA-Enterprise-TKIP*
WPA2-Enterprise-AES*
Mixed mode Enterprise*
To Next Page
Loading...
Need help?
General
