Printing Basics 159
3 Confirm whether the certificate is set correctly.
See also:
• "Confirming the Settings of a Digital Certificate" on page 155
NOTE:
• Confirm whether the newly set certificate, not the self-signed certificate, is associated.
4 After restarting the printer, the certificate set as described above is used as the server certificate when
executing communication with HTTP/IPP-SSL/TLS.
Setting Client Certificate for IEEE 802.1x (EAP-TLS)
NOTE:
• To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates" on page 152.
• This feature is enabled only when Enable is set for IEEE 802.1x (EAP-TLS).
1 Import a certificate to be used with SSL Client.
See also:
• "Importing a Digital Certificate" on page 154
2 Set a certificate to be used with SSL Client.
See also:
• "Setting a Digital Certificate" on page 155
3 Confirm whether the certificate is set correctly.
See also:
• "Confirming the Settings of a Digital Certificate" on page 155
4 After restarting the printer, the IEEE 802.1x (EAP-TLS) certificate is presented when IEEE 802.1x
communication with the RADIUS server starts. When the RADIUS server is set to require a client certificate,
the client certificate provided by the printer is verified by the RADIUS server.
To Next Page
Loading...
Need help?
General
