Fuji Xerox DocuPrint P455 D User Manual

76 Printer Connection and Software Installation
 Assigning an IP Address (for IPv4 Mode)
NOTE:
• When you assign an IP address manually in IPv6 mode, use the CentreWare Internet Services. To display the CentreWare
Internet Services, use the link local address. To check a link local address, see "Printing and Checking the Printer Settings
Page" on page 77.
• Assigning an IP address is considered as an advanced function and is normally done by a system administrator.
• Depending on the address class, the range of the IP address assigned may be different. On Class A, for example, an IP
address in the range from
0.0.0.0 to 127.255.255.255 will be assigned. For assignment of IP addresses, contact
your system administrator.
You can assign the IP address by using the operator panel.
1 Turn on the printer.
2 Ensure that Ready message appears on the LCD panel.
3 On the operator panel, press the (Menu) button.
4 Select Admin Menu, and then press the button.
5 Select Network Setup, and then press the button.
6 Select TCP/IP, and then press the button.
7 Select IPv4, and then press the button.
8 Select Get IP Address, and then press the button.
9 Select Panel, and then press the button.
10 Ensure that the message Restart Printer to apply setting appears, and then press the (Back)
button twice.
11 Select IP Address, and then press the button.
The cursor is located at the first octet of the IP address.
12 Specify the value of the IP address using the or button.
13 Press the button.
The cursor moves to the next octet.
14 Repeat steps 12 to 13 to set all of the digits in the IP address, and then press the button.
15 Ensure that the message Restart Printer to apply setting appears, and then press the (Back)
button twice.
16 Select Subnet Mask, and then press the button.
The cursor is located at the first octet of the subnet mask.
17 Specify the value of the subnet mask using the or button.
18 Press the button.
The cursor moves to the next octet.
19 Repeat steps 17 to 18 to set the subnet mask, and then press the button.
20 Ensure that the message Restart Printer to apply setting appears, and then press the (Back)
button twice.
21 Select Gateway Address, and then press the button.
The cursor is located at the first octet of the gateway address.

Fuji Xerox DocuPrint P455 D Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P455 D
Category	Printer
Language	English