Fuji Xerox DocuPrint P455 D User Manual

Using the Operator Panel Menus 163
Print Meter
Purpose:
To print the reports for the total number of pages printed.
Demo Page
Purpose:
To print a test page.
Stored Documents
NOTE:
• Stored Documents feature is available only when the optional 512MB memory is installed on the printer and RAM Disk under
System Settings is enabled or when the optional hard disk unit is installed.
Purpose:
To print a list of all files stored for Secure Print and Sample Print in the RAM disk or hard disk.
 Meter Readings
Purpose:
To check the total number of printed pages.
Values:
*1
This item always shows 0 on your printer.
 Admin Menu
Use the Admin Menu menu to configure a variety of printer features.
PCL Settings
Use the PCL Settings menu to change printer settings that only affect jobs using the PCL emulation printer
language.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Paper Tray
Purpose:
To specify the default paper tray.
Values:
*1
Tray2, Tray3, and Tray4 are available only when the optional 550 sheet feeder is installed.
Meter 1
*1
Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3
*1
Displays the total number of large size color prints.
Meter 4 Displays the total number of color and monochrome prints (Meter 1 + Meter 2).
Auto
*
Bypass Tray
Tray1
Tray2
*1
Tray3
*1
Tray4
*1

Fuji Xerox DocuPrint P455 D Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P455 D
Category	Printer
Language	English