182 Using the Operator Panel Menus
• Auditron Mode
Purpose:
To specify whether to limit the functions that can be used per user by Auditron authentication.
Values:
• No Acct User Prt
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
• LetterH Dup Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
• Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
• FW Download Mode
Purpose:
To specify whether to update the printer by downloading firmware.
Values:
Off
*
Does not limit functions by Auditron authentication.
On Limits functions by Auditron authentication.
Off
*
Does not permit non-account user to print the data.
On Permits non-account user to print the data.
Disable
*
Does not print on both sides of letterhead.
Enable Prints on both sides of letterhead.
Off Does not show the alert message when the toner is low.
On
*
Shows the alert message when the toner is low.
Disable Disables updating the printer.
Enable
*
Enables updating the printer.