194 Using the Operator Panel Menus
Tray Priority
Purpose:
To set the priority order of the paper trays for automatic tray selection. If paper trays loaded with the same paper size
and type exists, the paper tray is selected according to this priority order.
Values:
NOTE:
• Tray2, Tray3, Tray4, 3rd Priority, 4th Priority, and 5th Priority are available only when the optional 550
sheet feeder is installed.
• The paper tray name is not displayed in the priority menu after once selected.
1st Priority Bypass Tray
*
Sets the bypass tray as the first priority.
Tray1 Sets the standard 550 sheet tray as the first priority.
Tray2 Sets the optional 550 sheet feeder as the first
priority.
Tray3 Sets the optional 550 sheet feeder as the first
priority.
Tray4 Sets the optional 550 sheet feeder as the first
priority.
2nd Priority Bypass Tray Sets the bypass tray as the second priority.
Tray1
*
Sets the standard 550 sheet tray as the second
priority.
Tray2 Sets the optional 550 sheet feeder as the second
priority.
Tray3 Sets the optional 550 sheet feeder as the second
priority.
Tray4 Sets the optional 550 sheet feeder as the second
priority.
3rd Priority Bypass Tray Sets the bypass tray as the third priority.
Tray1 Sets the standard 550 sheet tray as the third
priority.
Tray2
*
Sets the optional 550 sheet feeder as the third
priority.
Tray3 Sets the optional 550 sheet feeder as the third
priority.
Tray4 Sets the optional 550 sheet feeder as the third
priority.
4th Priority Bypass Tray Sets the bypass tray as the fourth priority.
Tray1 Sets the standard 550 sheet tray as the fourth
priority.
Tray2 Sets the optional 550 sheet feeder as the fourth
priority.
Tray3
*
Sets the optional 550 sheet feeder as the fourth
priority.
Tray4 Sets the optional 550 sheet feeder as the fourth
priority.
5th Priority Bypass Tray Sets the bypass tray as the fourth priority.
Tray1 Sets the standard 550 sheet tray as the fifth priority.
Tray2 Sets the optional 550 sheet feeder as the fifth
priority.
Tray3 Sets the optional 550 sheet feeder as the fifth
priority.
Tray4
*
Sets the optional 550 sheet feeder as the fifth
priority.