Fuji Xerox DocuPrint P455 D User Manual

Troubleshooting 235
 Bead-Carry-Out (BCO)
 Jagged Characters
Problem Action
Bead-Carry-Out (BCO) is
happening.
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 257
• "Installing a Drum Cartridge" on page 260
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Problem Action
The printed result has jagged
characters.
Enable Bitmap Smoothing in the print driver. The following procedure uses the PCL
6 driver as an example.
1 On the Advanced tab, set Bitmap Smoothing under Image Options to On.
If the problem persists, check whether or not the downloaded font you are using is
recommended.
If using a downloaded font, ensure that the font is recommended for the printer,
operating system, and the application being used.
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.

Fuji Xerox DocuPrint P455 D Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P455 D
Category	Printer
Language	English