226 Troubleshooting
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 227
• "Toner Smears or Print Comes Off" on page 228
• "Random Spots/Blurred Images" on page 229
• "The Entire Output Is Blank" on page 230
• "Streaks Appear on the Output" on page 231
• "Vertical Blanks" on page 232
• "Mottle" on page 233
• "Ghosting" on page 233
• "Light-Induced Fatigue" on page 234
• "Fog" on page 234
• "Bead-Carry-Out (BCO)" on page 235
• "Jagged Characters" on page 235
• "Banding" on page 236
• "Auger Mark" on page 236
• "Wrinkled/Stained Paper" on page 237
• "Damage on the Leading Edge of Paper" on page 238
• "The Top and Side Margins Are Incorrect" on page 238
• "Protrudent/Bumpy Paper" on page 239
• "Images Are Skewed" on page 239
NOTE:
• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.
See also:
• "Understanding the Printer Menus" on page 162
• "CentreWare Internet Services" on page 65
To Next Page
Loading...
Need help?
General
