To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if my Furuno Plotter won't turn on?
If your Furuno Plotter won't turn on, check the following: a blown fuse, the power connector is tightly fastened, corrosion on the power cable connector, a damaged power cable, and ensure the battery voltage is 10.8 to 31.2 V.
General safety advice, handling instructions, and product disposal guidelines.
Essential warnings and cautions for preventing injury or equipment damage.
Detailed description of the unit's controls and buttons for operation.
Explanation of the RotoKeyTM and soft control functions and operation.
Step-by-step guide for powering the unit on and off.
Overview of the plotter's capabilities and map display features.
Guide to selecting and customizing the home screen displays.
How to navigate and operate the unit's menus.
Procedure for marking a man overboard position and related functions.
How to show, hide, and manage the boat's recorded track.
Instructions for starting, stopping, and configuring track recording parameters.
Methods for marking and saving points on the plotter display.
How to move points, select visibility, search, sort, and filter points.
Step-by-step guide to creating routes using menus and features.
How to navigate to quick points and saved points.
How to select and start navigation along a chosen route.
Understanding AIS target symbols and DSC message information.
Regular checks and cleaning procedures for optimal equipment performance.
Instructions for replacing fuses and resolving common operational issues.
Guidelines for mounting the main display unit on a tabletop or flush.
Instructions for selecting a suitable location and mounting the GPS antenna unit.
Methods for installing thru-hull, transom, and inside-hull transducers.
Guide to connecting power cables, GPS antenna, and transducers.
Performing initial system setup and configuring CAN bus data.
General
