GE AKTApure User Manual

4.2.1 Configuration of inlet valves
System properties
Follow the instruction below to update the system properties.
ActionStep
Open the system properties Edit dialog.1
Select Valves and pumps from the Component types list.2
Select components and properties according to the following table:3
PropertyComponent selectionValve
V9-IA (7-ports)Inlet AInlet valve V9-IA
V9H-IA (7-ports)Inlet valve V9H-IA
V9-IB (7-ports)Inlet BInlet valve V9-IB
V9H-IB (7-ports)Inlet valve V9H-IB
V9-IAB part A (2-ports)
or
V9H-IAB part A (2-ports)
Inlet AInlet valve V9-IAB or V9H-
IAB used for inlet A
V9-IAB part B (2-ports)
or
V9H-IAB part B (2-ports)
Inlet BInlet valve V9-IAB or V9H-
IAB used for inlet B
N/ASample inlet V9-ISSample inlet valve V9-IS
N/ASample inlet V9H-ISSample inlet valve V9H-IS
N/AInlet valve X1 (V9-IX)Inlet valve V9-IX
N/AInlet valve X1 (V9H-IX)Inlet valve V9H-IX
N/AInlet valve X2 (V9-IX)Inlet valve V9-IX, 2nd
N/AInlet valve X2 (V9H-IX)Inlet valve V9H-IX, 2nd
System settings
There are no system settings available for the inlet valves.
132 ÄKTA pure User Manual 29119969 AB
4 System configuration
4.2 Configure modules
4.2.1 Configuration of inlet valves

GE AKTApure Specifications

General

Brand	GE
Model	AKTApure
Category	Laboratory Equipment
Language	English