9.9 Manual instructions
It is possible to manually interact with an ongoing method using Manual instructions.
ActionStep
In the System Control module:1
•
select Manual:Execute Manual Instructions
or
•
use the shortcut Ctrl +M.
Result: The Manual instructions dialog opens.
In the Manual instructions dialog:2
•
Click the + symbol to show the instructions for the instruction group that you want to
modify.
•
Select the instruction that you want to modify.
•
Enter the new values for the instruction.
To execute several instructions at the same breakpoint, select and edit an instruction
and click Insert. Repeat for several instructions.
3
To update parameter fields during method run, check the Auto update... box.4
To perform the instructions, click Execute.5
All available manual instructions are described in the following subsections.
See pageSection
4679.9.1 Manual instructions - Pumps
4719.9.2 Manual instructions - Flow path
4739.9.3 Manual instructions - Monitors
4749.9.4 Manual instructions - Fraction collection
4789.9.5 Manual instructions - I/O-box
4799.9.6 Manual instructions - Alarms
4829.9.7 Manual instructions - Wash settings
4839.9.8 Manual instructions - Watch parameters
4849.9.9 Manual instructions - Advanced
4879.9.10 Manual instructions - Other
466 ÄKTA pure User Manual 29119969 AB
9 Reference information
9.9 Manual instructions