GE AKTApure User Manual

9.11 Available Curves
The table below lists all available Curves for ÄKTA pure.
DescriptionSampling
frequency
RangeCurve
The first UV/Vis absorbance signal
of the U9-M monitor.
10 Hz-6000.000 – 6000.000 mAUUV 1
The 2nd UV/Vis absorbance signal
of the U9-M monitor.
2 Hz-6000.000 – 6000.000 mAUUV 2
The 3rd UV/Vis absorbance signal
of the U9-M monitor.
2 Hz-6000.000 – 6000.000 mAUUV 3
The conductivity signal.5 Hz0.00 – 999.99 mS/cmCond
The conductivity signal as a percent-
age of a set range.
1 Hz0.0 – 100.0 %% Cond
The set concentration B or the cur-
rent value during a gradient.
1 Hz0.0 – 100.0 %Conc B
The set flow rate of the system
pumps.
1 Hz0.001 – 50.000 ml/min (ÄKTA
pure 25)
System flow
0.01 – 300.00 ml/min (ÄKTA
pure 150)
The set flow velocity of the system
pumps. Only available if a column
is selected.
1 Hzcm/hSystem linear
flow
The set flow rate of the sample
pump.
1 Hz0.001 – 50.000 ml/min (ÄKTA
pure 25)
Sample flow
0.01 – 300.00 ml/min (ÄKTA
pure 150)
The set flow velocity of the sample
pump. Only available if a column is
selected.
1 Hzcm/hSample linear
flow
The pre-column pressure signal.1 Hz-1.00 – 20.00 MPa (ÄKTA
pure 25)
PreC pressure
-1.00 – 5.00 MPa (ÄKTA pure
150)
The delta-column pressure signal.1 Hz-1.00 – 20.00 MPa (ÄKTA
pure 25)
DeltaC pressure
-1.00 – 5.00 MPa (ÄKTA pure
150)
ÄKTA pure User Manual 29119969 AB 491
9 Reference information
9.11 Available Curves

GE AKTApure Specifications

General

Brand	GE
Model	AKTApure
Category	Laboratory Equipment
Language	English