GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 5 Components and Function (Theory) 5-39
Section 5-6
External Peripherals
5-6-1 Introduction
The following external peripherals are used with the Vivid 3N ultrasound scanner:
• VCR (connected to Internal I/O)
• Black & White Video Printer (connected to Internal I/O)
• Color Video Printer (connected to BEP - D5)
• Color Inkjet Printer
5-6-1-1 VCR
The VCR operation is controlled from the Control Console, by way of the Keyboard Controller via
COM1. The VCR, which receives and transmits Y/C video signals, is used for recording and re-playing
exams. The appropriate type of VCR should be used for the local video signal - PAL or NTSC.
5-6-1-2 Black & White Video Printer
The B&W Video Printer receives a Black and White video signal and a trigger signal, and is controlled
via the Control Console.
5-6-1-3 Color Video Printer
The Color Video Printer receives an RGB video signal and a synch signal from the VIC. It is controlled
by the Control Console.
5-6-1-4 Color Inkjet Printer
The Color Inkjet Printer is used to print out reports and exams and is controlled via the parallel port of
the BEP. In the application software, the color inkjet printer is referred to as the PC Printer.
To Next Page
Loading...
Need help?
General
