HEIDENHAIN TNC 426 B User Manual

12 MOD Functions
300
12.4 Setting the Data Interfaces
To setup the data interfaces, press the RS 232- / RS 422 - SETUP
soft key. to call a menu for setting the data interfaces:
Setting the RS-232 interface
The mode of operation and baud rates for the RS-232 interface are
entered in the upper left of the screen.
Setting the RS-422 interface
The mode of operation and baud rates for the RS-422 interface are
entered in the upper right of the screen.
Setting the OPERATING MODE of the external
device
The functions “Transfer all files,” “Transfer selected file,”
and “Transfer directory” are not available in the
operating modes FE2 and EXT.
Setting the BAUD RATE
You can set the BAUD-RATE (data transfer speed) from 110 to
115,200 baud.
External device Operating mode Symbol
HEIDENHAIN floppy disk units
FE 401 B FE1
FE 401 from prog. no. 230 626 03 FE1
HEIDENHAIN floppy disk unit FE2
FE 401 up to prog. no. 230 626 02
PC with HEIDENHAIN data transfer FE1
Software TNCremo
Non-HEIDENHAIN devices such as EXT1, EXT2
Punchers, PC without TNCremo
PC with HEIDENHAIN software LSV2
TNCremo for remote operation of the TNC
12.4 Setting the Data Interfaces
Okap12.pm6 30.06.2006, 07:04300
www.EngineeringBooksPdf.com

HEIDENHAIN TNC 426 B Specifications

General

Brand	HEIDENHAIN
Model	TNC 426 B
Category	Control Systems
Language	English