HIKVISION DS-2CD6425G1-20 User Manual

Note
The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from
192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of
the PC to 192.168.1.100.
3.
Input 192.168.1.64 in the browser.
4.
Set device  password.

We highly recommend you create a strong password of your own choosing (using a minimum of
8 characters, including at least three of the following categories: upper case  lower case
 numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
 the password monthly or weekly can  protect your product.
5.
Click OK.
6.
Input the  password to log in to the device.
7.
 Go to  → Network → Basic → TCP/IP to change the IP address of the
device to the same segment of your network.
2.3 Login
Log in to the device via Web browser.
2.3.1 Plug-in 
Certain  systems and web browser may restrict the display and  of the camera
 You should install plug-in or complete certain  to ensure normal display and
 For detailed restricted  refer to the actual device.
 System Web Browser 
Windows
●
Internet Explorer 8+
●
Google Chrome 57 and
earlier version
●
Mozilla Firefox 52 and earlier
version
Follow pop-up prompts to
complete plug-in 
●
Google Chrome 57+
●
Mozilla Firefox 52+
Click
to
download and install plug-in.
Mac OS
●
Google Chrome 57+
●
Mozilla Firefox 52+
●
Mac Safari 16+
Plug-in  is not
required.
Network Camera User Manual
3

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English