HIKVISION DS-2CD6425G1-20 User Manual

And you also need to use the  version according to the security level required. SNMP v1
is not secure and SNMP v2 requires password for access. And SNMP v3 provides  and
if you use the third version, HTTPS protocol must be enabled.
3.
 the SNMP 
4.
Click Save.
7.3 Port Mapping
By  port mapping, you can access devices through the  port.
Before You Start
When the ports in the device are the same as those of other devices in the network, refer to Port
to modify the device ports.
Steps
1.
Go to  → Network → Basic  → NAT .
2.
Select the port mapping mode.
Auto Port Mapping Refer to
Set Auto Port Mapping for detailed 
Manual Port Mapping Refer to
Set Manual Port Mapping for detailed 
3.
Click Save.
7.3.1 Set Auto Port Mapping
Steps
1.
Check Enable UPnP™, and choose a friendly name for the camera, or you can use the default
name.
2.
Select the port mapping mode to Auto.
3.
Click Save.
Note
UPnP™  on the router should be enabled at the same 
7.3.2 Set Manual Port Mapping
Steps
1.
Check Enable UPnP™, and choose a friendly name for the device, or you can use the default
name.
2.
Select the port mapping mode to Manual, and set the external port to be the same as the
internal port.
3.
Click Save.
Network Camera User Manual
44

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English