HIKVISION DS-2CD6425G1-20 User Manual

Figure 6-8 Set Rule
5.
 You can set the parameters of  areas by  the above steps.
6.
For the arming schedule  refer to Set Arming Schedule . For the linkage method 
refer to Linkage Method  .
7.
Click Save.
6.2.10 Draw Area
This  introduces the  of area.
Steps
1.
Click Draw Area.
2.
Click on the live view to draw the boundaries of the  region, and right click to complete
drawing.
3.
Click Save.
Note
Click Clear All to clear all  areas.
6.2.11 Set Size Filter
This part introduces the  of size  Only the target whose size is between the minimum
value and maximum value is detected and triggers alarm.
Network Camera User Manual
40

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English