HIKVISION DS-2CD6425G1-20 User Manual

Manual Alarm
You can trigger an alarm output manually.
Steps
1.
Set the manual alarm parameters.
Alarm Output No.
Select the alarm output No. according to the alarm interface connected to the external alarm
device.
Alarm Name
Edit a name for the alarm output.
Delay
Select Manual.
2.
Click Manual Alarm to enable manual alarm output.
3.
 Click Clear Alarm to disable manual alarm output.
 Alarm
Set the  alarm parameters, then the device triggers an alarm output  in the
set arming schedule.
Steps
1.
Set  alarm parameters.
Alarm Output No.
Select the alarm output No. according to the alarm interface connected to the external alarm
device.
Alarm Name
Custom a name for the alarm output.
Delay
It refers to the   that the alarm output remains  an alarm occurs.
2.
Set the alarming schedule. For the  about the  see Set Arming Schedule .
3.
Click Copy to… to copy the parameters to other alarm output channels.
4.
Click Save.
8.2.2 FTP/NAS/Memory Card Uploading
If you have enabled and  the FTP/NAS/memory card uploading, the device sends the
alarm  to the FTP server, network  storage and memory card when an alarm is
triggered.
Network Camera User Manual
54

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English