HIKVISION DS-2CD6425G1-20 User Manual

Chapter 6 Event and Alarm
This part introduces the  of events. The device takes certain response to triggered
alarm. Certain events may not be supported by certain device models.
6.1 Basic Event
6.1.1 Set  
It helps to detect the moving objects in the  region and trigger the linkage 
Steps
1.
Go to  → Event → Basic Event →   .
2.
Check Enable  .
3.
 Highlight to display the moving object in the image in green.
1) Check Enable Dynamic Analysis for .
2) Go to  → Local .
3) Set Rules to Enable.
4.
Select  Mode, and set rule region and rule parameters.
-
For the  about normal mode, see
Normal Mode .
-
For the  about expert mode, see
Expert Mode .
5.
Set the arming schedule and linkage methods. For the  about arming schedule
 see
Set Arming Schedule . For the  about linkage methods, see Linkage
Method  .
6.
Click Save.
Expert Mode
You can     parameters for day and night according to the actual
needs.
Steps
1.
Select Expert Mode in .
2.
Set parameters of expert mode.
Scheduled Image 
OFF
Image switch is disabled.
Auto-Switch
Network Camera User Manual
29

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English