HIKVISION DS-2CD6425G1-20 User Manual

Note
●
Complete  management before  server  Refer to for detailed

●
When set up  between the device and the client  it is recommended to
use Enhanced SDK Service and set the  in Arming Mode to encrypt the data
transmission. See the user manual of the client  for the arming mode 
TLS (Transport Layer Security)
The device  TLS1.1, TLS1.2 and TLS1.3. Enable one or more protocol versions according
to your need.
Bonjour
Uncheck to disable the protocol.
3.
Click Save.
7.7 Set Open Network Video Interface
If you need to access the device through Open Network Video Interface protocol, you can
 the user  to enhance the network security.
Steps
1.
Go to  → Network → Advanced  →  Protocol .
2.
Check Enable Open Network Video Interface.
3.
Click Add to  the Open Network Video Interface user.
Delete Delete the selected Open Network Video Interface user.
Modify Modify the selected Open Network Video Interface user.
4.
Click Save.
5.
 Repeat the steps above to add more Open Network Video Interface users.
7.8 Set ISUP
When the device is registered on ISUP  (formerly called Ehome), you can visit and manage
the device, transmit data, and forward alarm  over public network.
Steps
1.
Go to  → Network → Advanced  →  Access .
2.
Select ISUP as the  access mode.
3.
Select Enable.
4.
Select a protocol version and input related parameters.
5.
Click Save.
Register status turns to Online when the  is correctly set.
Network Camera User Manual
48

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English