Allowed Only IP addresses in the list can access the device.
4.
Edit the IP address list.
Add Add a new IP address or IP address range to the list.
Modify Modify the selected IP address or IP address range in the list.
Delete Delete the selected IP address or IP address range in the list.
5.
Click Save.
9.11.3 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and
which improves the security of remote access.
Steps
1.
Go to → Network → Advanced → HTTPS .
2.
Check Enable .
3.
Click Delete to recreate and install
Create and install self-signed Refer to
Create and Install Self-signed
Create request and install
Refer to
Install Authorized
4.
Click Save.
Create and Install Self-signed
Steps
1.
Check Create Self-signed .
2.
Click Create.
3.
Follow the prompt to enter Country/Region, Hostname/IP, Validity and other parameters.
4.
Click OK.
Result
The device will install the self-signed by default.
Install Authorized
If the demand for external access security is high, you can create and install authorized
via HTTPS protocol to ensure the data transmission security.
Steps
1.
Select Create request and the .
2.
Click Create.
Network Camera User Manual
62
To Next Page
Loading...
Need help?
General
