HIKVISION DS-2CD6425G1-20 User Manual

Chapter 8 Arming Schedule and Alarm Linkage
Arming schedule is a customized  period in which the device performs certain tasks. Alarm
linkage is the response to the detected certain incident or target during the scheduled 
8.1 Set Arming Schedule
Set the valid  of the device tasks.
Steps
1.
Click Arming Schedule.
2.
Drag the  bar to draw desired valid 
Note
Up to 8 periods can be  for one day.
3.
Adjust the  period.
-
Click on the selected  period, and enter the desired value. Click Save.
-
Click on the selected  period. Drag the both ends to adjust the  period.
-
Click on the selected  period, and drag it on the  bar.
4.
 Click Copy to... to copy the same  to other days.
5.
Click Save.
8.2 Linkage Method 
You can enable the linkage  when an event or alarm occurs.
8.2.1 Trigger Alarm Output
If the device has been connected to an alarm output device, and the alarm output No. has been
 the device sends alarm  to the connected alarm output device when an
alarm is triggered.
Steps
1.
Go to  → Event → Basic Event → Alarm Output .
2.
Set alarm output parameters.
 Alarm For the  about the  see
 Alarm .
Manual Alarm For the  about the  see
Manual Alarm .
3.
Click Save.
Network Camera User Manual
53

HIKVISION DS-2CD6425G1-20 Specifications

General

Brand	HIKVISION
Model	DS-2CD6425G1-20
Category	Security Camera
Language	English