The funcon is disabled. The device will not detect whether a person is wearing a hard hat or
not.
Reminder of Wearing Hard Hat
If the person do not wear the hard hat when authencang, the device will pop up a prompt
and the door will open.
Must Wear Hard Hat
If the person do not wear the hard hat when authencang, the device will pop up a prompt
and the door will keep closed.
Face with Mask Detecon
Aer enabling the face with mask detecon, the system will recognize the captured face with
mask picture. You can set face with mask1:N matching threshold, it's ECO mode, and the
strategy.
None
The device will detect the face with mask without prompt.
Prompt and Open
If the person do not wear a face mask when authencang, the device prompts a
nocaon and the door will open.
Prompt and Not Open Door
If the person do not wear a face mask when authencang, the device prompts a
nocaon and the door keeps closed.
Fing
erprint Security Level
Select the
ngerprint security level.
The higher is the security level, the lower is the false acceptance rate (FAR).
The higher is the security level, the higher is the false rejecon rate (FRR).
Set Recognion Area
Click Conguraon → Smart → Area Conguraon .
Drag the yellow frame in the live video to adjust the recognion area. Only the face within the area
c
an be recognized by the system.
Click Save to save the sengs.
Click
or to record videos or capture pictures.
8.5.21 Set Noce
Publicaon
You can set the screen saver and the sleep
me for the device.
Click Conguraon → Noce Publicaon .
DS-K1T341A Series Face
Recognion Terminal User Manual
86