HIKVISION DS-K1T341AMF User Manual

9.4.11 Congure Resident Informaon
If the person is resident, for video intercom purpose, you need to set the room number for
her/him and bind an indoor staon.
Aer bound, you can call this person by calling the indoor
staon
and perform video intercom with her/him.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the R
esident Informaon panel, select the indoor staon to bind it to the person.
Note
If you select Analog Indoor Staon, the Door
Staon eld will display and you are required to
select the door staon to communicate with the analog indoor staon.
4. En
ter the oor No. and room No. of the person.
5. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons.
9.4.12 Congure Addional Informaon
When adding person, you can congure the
addional informaon for the person, such as person's
identy type, identy No., country, etc., according to actual needs.
St
eps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
Note
Enter the person's basic informaon rst. For details about conguring person's basic
informaon, refer to Congure Basic Informaon .
3. In the
Addional Informaon panel, enter the addional informaon of the person, including
person's ID type, ID No., job tle, etc., according to actual needs.
4. Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons .
DS-K1T341A Series Face
Recognion Terminal User Manual
109

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English