HIKVISION DS-K1T341AMF User Manual

7.11.3 Call Device from Client Soware
Steps
1. Get the client soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
2. Run the clien
t soware and the control panel of the soware pops up.
3. Click Device Management to enter the Device Management page.
4. Add the device to the client soware.
Note
For details about adding device, see Add De
vice.
5. En
ter the Live View page and double-click the added device to start live view.
Note
For details about operaons in the Liv
e View page, see Live View in the user manual of the
client soware.
6. Righ
t click the live view image to open the right-click menu.
7. Click Start Two-Way Audio to start two-way audio between the device and the client soware.
7.11.4 Call Room from Device
Steps
1. Ge
t the client soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
2. Run the client soware and the control panel of the soware pops up.
3. Click De
vice Management to enter the Device Management interface.
4. Add the indoor staon and the device to the client soware.
Note
For details about adding device, see Add De
vice.
5. Link a user t
o an indoor staon and set a room No. for the indoor staon.
6. Call the room.
-
If you have
congured a specied room No. in the Basic Sengs , you can tap
to call the
r
oom.
-
If you have not congured a specied room No. in the Basic Sengs , you should tap
on
the authencaon page of the device. Enter the room No. on the dial page and tap to call
the r
oom.
7. Aer the indoor staon answers the call, you can start two-way audio with the indoor staon.
DS-K1T341A Series Face
Recognion Terminal User Manual
56

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English