HIKVISION DS-K1T341AMF User Manual

3. In the Auto-Calculate Aendance area, set the me that you want the client to calculate the
da
ta.
4. Click Save.
The client will calculate the aendance data of the previous day from the me you have
congured.
Manually Calculate Aendance Data
You can calculate the aendance data manually by seng the data range.
Steps
1. Enter the Time & Aendance module.
2. Click Aendance
Stascs → Calculate Aendance .
3. Set the start me and end me to dene the aendance data range.
4. Set other condions, including department, person name, employee No. and aendance status.
5. Click Calculate.
Note
It can only calculate the aendance data within three months.
6. P
erform one of the following operaons.
Correct Check-
in/
out
Click Correct Check-in/out to add check-in/out correcon.
Report Click R
eport to generate the aendance report.
Export Click Export t
o export aendance data to local PC.
Note
The exported details are saved in CSV format.
9.11.8 Aendance Stascs
You can check the original aendance record, generate and export the aendance report based on
the c
alculated aendance data.
Get Original Aendance Record
You can search the employee's
aendance me, aendance status, check point, etc. in a me
period to get an original record of the employees.
DS-K1T341A Series Face
Recognion Terminal User Manual
168

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English