HIKVISION DS-K1T341AMF User Manual

5.4 Acvate Device via Client Soware
For some devices, you are required to create the password to acvate them before they can be
added to the soware
and work properly.
Steps
Note
This funcon should be supported by the device.
1. En
ter the Device Management page.
2. Click
on the right of De
vice Management and select Device.
3. Click Online Device to show the online device area.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and select an inacve device.
5. Click Acvate to open the Acvaon dialog.
6. Create a password in the password eld, and conrm the password.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7. Click OK t
o acvate the device.
DS-K1T341A Series Face
Recognion Terminal User Manual
20

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English