HIKVISION DS-K1T341AMF User Manual

select a status to take aendance manually, the authencaon will be marked as the edited
aendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authencaon from Monday 11:00 to 12:00 will be marked as break.
8.5.18 Set Video Intercom Parameters
The device can be used as a door staon, outer door staon, or access control device. You should
set the device No. before usage.
Click Conguraon → Video Intercom → Device No. .
If set the device type as Door Staon or Access Control Device, you can set the period No.,
building No., unit No., oor No., door staon No., and community No.
Click Save to save the sengs aer the conguraon.
Figure 8-10 Device No. Sengs
Device Type
The device can be used as a door staon or outer door staon. Select a device type from the
drop-down list.
Note
If you change the device type, you should reboot the device.
Period No.
Se
t the device installed period No.
Building No.
Set the device installed building No.
Unit No.
Set the device installed unit No.
Floor No.
DS-K1T341A Series Face Recognion Terminal User Manual
76

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English