HIKVISION DS-K1T341AMF User Manual

8.5.12 Network Sengs
Set TCP/IP, port, report strategy and plaorm access.
Set Basic Network Parameters
Click Conguraon → Network → Basic Sengs → TCP/IP .
Figure 8-5 TCP/IP Sengs Page
Set the parameters and click Sa
ve to save the sengs.
DHCP
If uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
g
ateway, MTU, and the device port.
If you check the funcon, the system will allocate the IPv4 address, IPv4 subnet mask, and the
IPv4 de
fault gateway automacally.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
Set Port Parameters
Set the HTTP, RTSP, HTTPS, Server and WebSocket port parmaeters.
Click Conguraon → Ne
twork → Basic Sengs → Port .
HTTP
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modied to 81, you need to enter hp://192.0.0.65:81 in the browser for login.
RTSP
It refers to the port of real-me streaming protocol.
DS-K1T341A Series Face Recognion Terminal User Manual
67

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English