It contains more than one metables. The person can check in/out in any of the metables
and the aendance will be eecve.
If the mulple shi schedules contains three metables: 00:00 to 07:00, 08:00 to 15:00 and
16:00 to 23:00. The aendance of the person adopng this mulple
shi schedules will be
eecve in any of the three metables. If the person checks in at 07:50, it will apply the
near
est metable 08:00 to 15:00 to the person's aendance.
Rule
Set other rule for the schedule, such as Check-in Not Required, andCheck-out Not Required.
6. Click Save.
Check Shi Schedule
You can check the shi schedule in calendar or list mode. You ca also edit or delete the shi
schedule.
Steps
1. Click Time & Aendance → Shi Schedule to enter the Shi Schedule Management page.
2. Select the organizaon and corresponding person(s).
3. Click or to view the shi schedule in calendar or list mode.
Calendar
In calendar mode, you can view the shi schedule for each day in one month. You can click
the t
emporary schedule for one day to edit or delete it.
List
In list mode, you can view the shi schedule details about one person or organizaon, such
as shi name, type, eecve period and so on. Check the shi schedule(s), and click Dele
te
to delete the selected shi schedule(s).
9.11.5 Manually Correct Check-in/out Record
If the aendance status is not correct, you can manually correct the check-in or check out record.
Y
ou can also edit, delete, and export the check-in or check-out record.
Before You Start
• You should add organizaons and persons in Person module. For details, refer to P
erson
Management .
• The person's aendance status is incorrect.
Steps
1. Click Time & Aendance → Aendance Handling t
o enter aendance handling page.
2. Click Correct Check-in/out to enter adding check-in/out correcon page.
3. Select one or more persons from le list for correcon.
4. Select the correcon date.
DS-K1T341A Series Face Recognion Terminal User Manual
165