HIKVISION DS-K1T341AMF User Manual

The User is the normal user. The user can only authencate or take aendance on the inial
page.
7. Tap to save the
sengs.
7.3.5 Set Authencaon Mode
Aer adding the user's face picture, ngerprint, password, or other credenals, you should set the
authencaon mode and the user can authencate his/her identy via the congured
authencaon mode.
St
eps
1. Long tap on the inial page for 3 s and slide to the le/right by following the gesture and log in
the backend.
2. Tap User → Add User/Edit User → Authencaon Mode .
3. Select Device or Custom as the authencaon mode.
Device
If you want to select device mode, you should set the terminal authencaon mode in
Access Control Sengs page rst. For details see Seng Access Control Parameters.
Custom
You can combine dierent authencaon modes together according to your actual needs.
4. Tap to save the
sengs.
7.3.6 Search and Edit User
Aer adding the user, you can search the user and edit it.
Search User
On the User Management page, Tap the search area to enter the Search User page. Tap Card on
the le of the page and select a search type from the drop-down list. Enter the employee ID, card
No., or the user name f
or search. Tap
to search.
Edit User
On the User Management page, select a user from the user list to enter the Edit User page. Follow
the s
teps in User Management to edit the user parameters. Tap
to save the sengs.
Note
The employee ID cannot be edited.
DS-K1T341A Series Face Recognion Terminal User Manual
38

HIKVISION DS-K1T341AMF Specifications

General

Brand	HIKVISION
Model	DS-K1T341AMF
Category	Touch terminals
Language	English