To Next Page

To Previous Page

Put the QR code in front of the device camera to authencate via QR code.

Note

Authencaon via QR code should be supported by the device.

If authencaon completed, a prompt "Authencated" will pop up.

7.5.2 Authencate via Mulple

Credenal

Before You Start

Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .

Steps

1. If the authencaon mode is Card and Face, Password and Face, Card and Password,

authencate any credenal according to the instrucons on the live view page.

Note

• The card can be normal IC card, or encrypted card.

•

If the QR Code Scanning funcon is enabled, you can put the QR code in front of the device

camera to authencate via QR code.

2. Aer the previous credenal is authencated,

connue authencate other credenals.

Note

For detailed informaon about authencang face, see Tip

s When Collecng/Comparing Face

Picture.

authencaon succeeded, the prompt "Authencated" will pop up.

7.6 Basic Sengs

You can set the shortcut key, voice, me, language, supplement light, community No., building No.,

Unit No., and beauty

Long tap on the inial page for 3 s and slide to the le/right by following the gesture and login the

device home page. Tap Basic.

DS-K1T341A Series Face Recognion Terminal User Manual

HIKVISION DS-K1T341AMF User Manual

Questions and Answers: