HIKVISION iDS-6700NXI-I/FA Series User Manual

Network Video Recorder User Manual
80
3. Optional: Check Save VCA Picture to save the captured pictures of detection.
4. Select an event detection (Temperature Measurement Alarm, etc.).
5. Set the arming schedule. Refer to Configure Arming Schedule.
6. Set the linkage actions. Refer to Configure Linkage Actions.
7. Click Apply.
6.2.14 Queue Management
After connecting with queue management camera, you can set the arming schedule and linkage
action of queue management.
Before You Start
Ensure the recorder have connected with queue management camera.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a queue management camera.
3. Optional: Check Save VCA Picture to save the captured pictures of detection.
4. Set the arming schedule. Refer to Chapter Configure Arming Schedule for details.
5. Set the linkage actions. Refer to Chapter Configure Linkage Actions for details.
6. Click Apply.
6.3 Configure Arming Schedule
Steps
1. Click Arming Schedule.
2. Click Edit.
3. Select a day of the week and set the time period. Up to eight time periods can be set each day.
Note
Time periods cannot repeat or overlapped.

HIKVISION iDS-6700NXI-I/FA Series Specifications

General

Brand	HIKVISION
Model	iDS-6700NXI-I/FA Series
Category	Network Hardware
Language	English