Network Video Recorder User Manual
3
Figure 1-2 Activate via SADP
4. Create and input the new password in the password field, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
5. Click Activate.
1.1.4 Activate via Client Software
The client software is versatile video management software for multiple kinds of devices.
Before You Start
Get the client software from the supplied disk or the official website, and install the software
according to the prompts.
Steps
1. Run the client software and the control panel of the software pops up, as shown below.
To Next Page
Loading...
Need help?
General
