Network Video Recorder User Manual
15
Note
3. Set protocol parameters.
Type
The network camera adopting custom protocol must support getting stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
getting main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
4. Click OK.
5. Click Custom Add to add cameras.
6. Set the parameters.
7. Click OK.
1.5 Connect to Platform
1.5.1 Configure ISUP
SDK is based on Intelligent Security Uplink Protocol (ISUP). It provides APIs, library files, and
commands for the third-party platform to access devices such as NVRs, speed domes, DVRs,
network cameras, mobile NVRs, mobile devices, decoding devices, etc. With this protocol, the
third-party platform can realize functions like live view, playback, two-way audio, PTZ control, etc.
Steps
1. Go to System → Network → Advanced → Platform Access.
To Next Page
Loading...
Need help?
General
