Network Video Recorder User Manual
59
3. Set the start time and end time. You can click to set the time period, or set a time segment
on time bar.
4. Click to save the video clip to a storage device.
4.3.4 Switch between Main Stream and Sub-Stream
You can switch between the main stream and the sub-stream during the playback.
Note
The encoding parameters for the main stream and sub-stream can be configured in Storage →
Encoding Parameters.
4.3.5 Switch Audio Source
If the network has linked a network audio device, you can switch the audio source to the linked
audio device during playback.
Move the cursor to at the toolbar, and then select an audio channel as your desire.
4.3.6 Thumbnails View
With the thumbnails view on the playback interface, you can conveniently locate the required
video files on the time bar.
In the playback mode, position the cursor on time bar to get preview thumbnails.
Figure 4-10 Thumbnails View
You can click a thumbnail to enter the full-screen playback.