Network Video Recorder User Manual
48
Figure 4-2 Record Schedule
Note
● You can repeat the above steps to set schedule recording or capture for each day in the
week.
● Continuous recording is applied to each day by default.
6. Optional: Copy the recording schedule to other camera(s).
1) Click Copy to.
2) Select camera(s) to duplicate with the same schedule settings.
3) Click OK.
7. Click Apply.
4.1.6 Configure Continuous Recording
The device can continuously record the video within the configured time schedule.
Steps
1. Go to Camera → Encoding Parameters → Recording Parameters.
2. Set the continuous main stream/sub-stream recording parameters for the camera.
3. Go to Storage → Recording Schedule.