EasyManuals Logo
Home>HIKVISION>Network Hardware>iDS-6700NXI-I/FA Series

HIKVISION iDS-6700NXI-I/FA Series User Manual

HIKVISION iDS-6700NXI-I/FA Series
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Network Video Recorder User Manual
7
supported resolutions include 1024 × 768 and above.
Steps
1. Enter the IP address in web browser, and then press Enter. The default IP address is
192.168.1.64.
Figure 1-7 Web Browser Activation
2. Set the password for the admin user account.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
3. Click OK.
1.2 Configure TCP/IP
TCP/IP must be properly configured before operating your device over a network. Both IPv4 and
IPv6 are available.
Steps
1. Go to System Network TCP/IP.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-6700NXI-I/FA Series and is the answer not in the manual?

HIKVISION iDS-6700NXI-I/FA Series Specifications

General IconGeneral
BrandHIKVISION
ModeliDS-6700NXI-I/FA Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals