Network Video Recorder User Manual
71
that necessary actions can be taken in advance.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Fast Moving.
Figure 6-5 Fast Moving Detection
4. Check Enable Fast Moving.
5. Optional: Check Save VCA Picture to save the captured fast moving detection pictures.
6. Set fast moving detection parameters.
1) Select Arming Region. Up to 4 regions are selectable.
2) Click Draw Area to draw a quadrilateral in the preview window by specifying four vertices of
the area.
3) Set Sensitivity.
Sensitivity
Similarity of the background image to the object. The higher the value is, more easily the
detection alarm will be triggered.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set the linkage actions. Refer to Configure Linkage Actions.
9. Click Apply.
6.2.6 Parking Detection
Parking detection is used to detect parking violation in the area, applicable in expressway and one-
To Next Page
Loading...
Need help?
General
