Network Video Recorder User Manual
72
way street.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Parking.
Figure 6-6 Parking Detection
4. Check Enable Parking Detection.
5. Optional: Check Save VCA Picture to save the captured parking detection pictures.
6. Set parking detection parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Set Time Threshold.
Time Threshold
The time of a vehicle staying in the region. If the value is 10, an alarm will be triggered after
the vehicle has stayed in the region for 10 s. Range: [5-20].
3) Set Sensitivity.
Sensitivity
Similarity of the background image to the object. The higher the value is, more easily the
detection alarm will be triggered.
To Next Page
Loading...
Need help?
General
