Network Video Recorder User Manual
201
device.
Steps
1. Go to Maintenance → System Service → Address Filter.
Figure 15-21 Address Filter
2. Check Enable.
3. Select Restriction Mode. Choose to filter by IP address or MAC Address.
4. Select Restriction Type. The device mechanism will allow or forbid specific IP/MAC address to
get access to your device.
5. Optional: Set Restriction List. You can add, edit or delete address.
6. Click Apply to save the settings.
15.13.3 RTSP Authentication
You can specifically secure the stream data of live view by setting the RTSP authentication.
Steps
1. Go to System → System Service → System Service.
Figure 15-22 RTSP Authentication
2. Select RTSP Authentication Type.
To Next Page
Loading...
Need help?
General
