CYLINDER HEAD/VALVES
9-19
To prevent loss of
tension, do not
compress the valve
springs more than
necessary.
Install the valve spring cotters using the valve
spring compressor.
Support the cylin-
der head so the
valve heads will not
contact anything
that cause damage.
Tap the valve stems gently with two plastic ham-
mers to seat the cotters firmly.
Install the cylinder head (page 9-19).
CYLINDER HEAD INSTALLATION
Be careful not to
damage the mating
surfaces.
Clean the mating surfaces of the cylinder head and
cylinder thoroughly.
Blow out the oil passages in the cylinder head with
compressed air.
Install the cam chain guide by aligning it bosses
with the grooves in the cylinder.
Install the two dowel pins and a new gasket.
TOOLS:
Valve spring compressor 07757-0010000
Valve spring compressor attach-
ment
07959-KM30101
To Next Page
Loading...
Need help?
General
